top of page
  • Writer's pictureFera

How to deal with the water spills on the MacBook

If your MacBook has been damaged by water, it's important to act quickly to minimize the damage to the MacBook. Here are the steps you should follow:

  1. Turn off the MacBook: If the MacBook is still on, turn it off immediately by holding down the power button. Do not try to turn it back on.

  2. Remove or disconnect the battery: If possible, remove the battery from the MacBook to prevent any further damage. Most of the newer macbook have the battery installed or glued to the top case which requires opening the back cover. (You can skip this part)

  3. Disconnect all cables and peripherals: Disconnect any cables and external devices that are connected to the MacBook.

  4. Dry the MacBook: Use a clean, dry cloth to wipe down the exterior of the MacBook, removing any visible moisture. Do not use a hair dryer or any other heating device to dry the MacBook, as this can cause additional damage.

  5. Leave the MacBook in a dry place: Leave the MacBook in a dry place, with the lid open in a flip position on a flat and soft surface, to allow any remaining moisture to evaporate. Make sure the surface is clean and Do not attempt to turn on the MacBook or charge the battery until a professional technician takes a look inside the machine to prevent getting the motherboard shorted or other components.

  6. Seek professional repair: If the MacBook has been damaged by water, it's best to seek professional repair. A repair specialist can diagnose the extent of the damage and determine the best course of action to repair or replace any damaged components. If you are in Vancouver, North shore, UBC, Burnaby SFU area you can contact our repair team at 604-653-6591 to help you immediately. Our professional and trained technicians can help with free diagnostics on the same- day or within a day and provide more details on the repair steps.

9 views0 comments


bottom of page